ADINA in Exciting Areas of Research
ADINA is very widely used in diverse areas of exciting research. To highlight these areas and provide our users with easy access to related publications, we listed many papers on studies in which ADINA was used on the ADINA Publications page. Recently, we have updated this page and added more than 100 new papers on the usage of ADINA in many exciting studies:
- Alternative Energy, Nanotechnology and MEMS: Fuel cell, wind turbine, space solar cell, atomic force microscopy, nano-indentation, micro roughness for drag reduction, micropumps, etc.
- Biomechanics, Biomedical and Biotechnology: Cell and tissue mechanics, cardiovascular, orthopedic, eye disease, contact lens, drug delivery, ventricular assist devices, spine, carpal tunnel, implant/prosthetic design, meniscus replacement, lung, vessel remodeling, vocal fold, bioreactor, mitral valve leaflet, etc.
- Civil (Structural/Geotechnical): Borehole stability, dam-reservoir interaction, slope stability, composite concrete-steel frames, historic masonry structures, tunnels, buried pipeline subject to earthquake, interfacial debonding in reinforced concrete, pile-soil interaction, reservoir landslide, hydrofracture, modeling tsunami, etc.
- Mechanics and Materials: Laser deposition, microstructure modification, passive vibration control, fiber-reinforced composites, delamination, fracture mechanics, friction welding, journal bearing, metal forming, thermomechanics of rocket nozzles, piping systems, stiffened plates, dynamics of liquid storage tanks, nuclear power plants, cohesive zone, etc.
The comprehensive capabilities offered in ADINA for simulating Structures, Fluids, Fluid-structure Interactions and Multiphysics, are instrumental in the success of these researches.
Here we highlight some of these papers. For the complete list, see ADINA Publications.
Multi-scale design simulation of a novel intermediate-temperature micro solid oxide fuel cell stack system
S.F. Lee, C.W. Hong
Department of Power Mechanical Engineering, National Tsing Hua University, Hsinchu 30013, Taiwan
Int. J. of Hydrogen Energy (In press, 2010)
Direct methanol fuel cell bubble transport simulations via thermal lattice Boltzmann and volume of fluid methods
K. Fei, T.S. Chen, C.W. Hong
Department of Power Mechanical Engineering, National Tsing Hua University, 101, Sec. 2, Kwang Fu Road, Hsinchu 30013, Taiwan
Journal of Power Sources 195 (2010) 1940–1945
Fluid-Structure Coupled Analyses of Composite Wind Turbine Blades
Tai-Hong Cheng1, Il-Kwon Oh2
1School of Mechanical Engineering, Chonnam National University, 300 Yongbong-dong, Buk-gu, Gwang-Ju, 500-757, Republic of Korea
2School of Mechanical Systems Engineering, Chonnam National University, 300 Yongbong-dong, Buk-gu, Gwang-Ju, 500-757, Republic of Korea
Advanced Materials Research Vols. 26-28 (2007) pp 41-44
Crack growth resistance of shape memory alloys by means of a cohesive zone model
Yuval Freed, Leslie Banks-Sills
The Dreszer Fracture Mechanics Laboratory, Department of Solid Mechanics, Materials and Systems, The Fleischman Faculty of Engineering, Tel Aviv University, 69978 Ramat Aviv, Israel
Journal of the Mechanics and Physics of Solids 55 (2007) 2157–2180
Delamination behaviour of very high modulus carbon/epoxy marine composites
N. Barala, P. Daviesb, C. Baleyc, B. Bigourdanb
aTrimaran Groupama, 56100 Lorient, France
bMaterials and Structures Group, IFREMER Brest Centre, 29280 Plouzane, France
cUniversite de Bretagne Sud, L2PIC, BP 92116, 56321 Lorient Cedex, France
Composites Science and Technology 68 (2008) 995–1007
MRI-based biomechanical imaging: initial study on early plaque progression and vessel remodeling
Jie Zhenga, Dana R. Abendscheina, Ruth J. Okamotoa, Deshan Yanga, Kyle S. McCommisa, Bernd Misselwitzb, Robert J. Groplera, Dalin Tangc
aMallinckrodt Institute of Radiology, Washington University, St. Louis, MO 63131, USA
bBayer Schering Pharma AG, 13353 Berlin, Germany
cWorcester Polytechnic Institute, MA 01609, USA
Magnetic Resonance Imaging (2009, in press)
A numerical study of the flow-induced vibration characteristics of a voice-producing element for laryngectomized patients
S.L. Thomsona, J.W. Tackb, G.J. Verkerkeb,c
aDepartment of Mechanical Engineering, Brigham Young University, 435 CTB, Provo, UT, USA
bDepartment of BioMedical Engineering, University Medical Center Groningen, University of Groningen, The Netherlands
cDepartment of Biomechanical Engineering, University of Twente, The Netherlands
Journal of Biomechanics 40 (2007) 3598–3606
Finite element analysis of blood flow characteristics in a Ventricular Assist Device (VAD)
Mir-Hossein Moosavi, Nasser Fatouraee, Hamid Katoozian
Biological Fluid Mechanics Research Laboratory, Biomedical Engineering Faculty, Amirkabir University of Technology (Tehran Polytechnic), Tehran 15914, Iran
Simulation Modelling Practice and Theory 17 (2009) 654–663
Influence of microcalcifications on vulnerable plaque mechanics using FSI modeling
Danny Bluesteina, Yared Alemua, Idit Avrahamib,e, Morteza Gharibb, Kris Dumonta, John J. Ricottac, Shmuel Einava,d
aDepartment of Biomedical Engineering, Stony Brook University, Stony Brook, NY 11794-8181, USA
bAeronautics and Bioengineering, California Institute of Technology, Pasadena, CA, USA
cDepartment of Surgery, Stony Brook University Hospital, Stony Brook University, Stony Brook, NY 11794-8181, USA
dDepartment of Bioengineering, Tel Aviv University, Tel Aviv, Israel
eAfeka College of Engineering, Tel Aviv, Israel
Journal of Biomechanics 41 (2008) 1111–1118
Numerical Simulations of Blood Flow in Artificial and Natural Hearts With Fluid–Structure Interaction
*Matthew G. Doyle, *Jean-Baptiste Vergniaud, *Stavros Tavoularis, and *,†Yves Bourgault
*Department of Mechanical Engineering, University of Ottawa
†Department of Mathematics and Statistics, University of Ottawa, Ottawa, Canada
Artificial Organs 32(11):870–879, 2008
Contact interface in seismic analysis of circular tunnels
Hassan Sedarata, Alexander Kozaka, Youssef M.A. Hashashb, Anoosh Shamsabadic, Alex Krimotata
aSC Solutions, 1261 Oakmead Parkway, Sunnyvale, CA 94085, USA
bUniversity of Illinois at Urbana-Champaign, 205 N. Mathews Ave., Urbana, IL 61801, USA
cCaltrans, Department of Transportation, State of California, 3 Mayapple Way, Irvine, CA 92612, USA
Tunnelling and Underground Space Technology 24 (2009) 482–490
Modeling the dynamic process of tsunami earthquake by liquid-solid coupling model
CAI Yong-en and ZHAO Zhi-dong
Department of Geophysics, Peking University, Beijing 100871, China
Acta Seismologica Sinica Vol.21 No.6 (598-607) 2008
Numerical simulation of fluid–structure interaction in stenotic arteries considering two layer nonlinear anisotropic structural model
Alvaro Valencia, Fernando Baeza
Department of Mechanical Engineering, Universidad de Chile, Casilla 2777, Santiago, Chile
International Communications in Heat and Mass Transfer 36 (2009) 137–142
A numerical investigation of waves propagating in the spinal cord and subarachnoid space in the presence of a syrinx
C.D. Bertram
Biofluid Mechanics Laboratory, Faculty of Engineering, University of New South Wales, Sydney 2052, Australia
Journal of Fluids and Structures 25 (2009) 1189–1205
Characterization of the highly nonlinear and anisotropic vascular tissues from experimental inflation data: a validation study towards the use of clinical data for in-vivo modeling and analysis
Kinon Chen1, Bahar Fata2, and Daniel R. Einstein3
1Department of Biomedical Engineering, University of Southern California, Los Angeles, CA
2Department of Bioengineering, University of Pittsburgh, Pittsburgh, PA
3Biological Monitoring & Modeling, MS P7-56, Pacific Northwest National Laboratory, Richland, WA
Ann Biomed Eng. 2008 October ; 36(10): 1668–1680.
Fluid-structure analysis of microparticle transport in deformable pulmonary alveoli
H.L. Daileya, S.N. Ghadialia,b
aMechanical Engineering and Mechanics, Lehigh University, Bethlehem, PA 18015, USA
bBioEngineering Program, Lehigh University, Bethlehem, PA 18015, USA
Aerosol Science 38 (2007) 269 – 288
Drag Reduction on Micro-Structured Super-hydrophobic Surface
Doyoung Byun1, Saputra2 and Hoon Cheol Park2
1Artificial Muscle Research Center, Department of Aerospace Engineering, Konkuk University, 1 Hwayang-dong, Gwangjin-gu, 143-701 Seoul, Korea
2Artificial Muscle Research Center, Department of Advanced Technology Fusion, Konkuk University,1 Hwayang-dong, Gwangjin-gu, 143-701 Seoul, Korea
Proceedings of the 2006 IEEE International Conference on Robotics and Biomimetics
Modeling and optimizing passive valve designs for the implantable Gold Micro-Shunt used in glaucoma treatment
Judy L. Lin, Jason M. Clevenger
SOLX, Inc., 890 Winter Street, Suite 115, Waltham, MA 02451, USA
Computers and Structures 87 (2009) 664–669
Biphasic Finite Element Model of Solute Transport for Direct Infusion into Nervous Tissue
Xiaoming Chen and Malisa Sarntinoranont
Department of Mechanical and Aerospace Engineering, 212 MAE-A, University of Florida, Gainesville, FL 32611, USA
Annals of Biomedical Engineering, Vol. 35, No. 12, December 2007, pp. 2145–2158
Mechanical characterization of contact lenses by microindentation: Constant velocity and relaxation testing
Sung Jin Leea, Gerald R. Bourneb, Xiaoming Chena, W. Gregory Sawyera, Malisa Sarntinoranonta
aDepartment of Mechanical and Aerospace Engineering, University of Florida, Gainesville, FL 32611, USA
bDepartment of Material Science and Engineering, University of Florida, Gainesville, FL 32611, USA
Acta Biomaterialia 4 (2008) 1560–1568
Nonlinear fluid–structure interaction calculation of the leakage behaviour of cracked concrete walls
Christoph Niklascha, Nico Herrmannb
aEd. Züblin AG, Technical Head Office, Tunnel Engineering Department, Albstadtweg 3, 70567 Stuttgart, Germany
bMaterials Testing and Research Institute (MPA Karlsruhe), Universität Karlsruhe (TH), 76128 Karlsruhe, Germany
Nuclear Engineering and Design 239 (2009) 1628–1640
A fluid-immersed multi-body contact finite element formulation for median nerve stress in the carpal tunnel
Cheolwoong Ko and Thomas D. Brown
Department of Orthopaedics and Rehabilitation University of Iowa, Iowa City, IA 52242-1100, USA
Comput Methods Biomech Biomed Engin. 2007 October ; 10(5): 343–349.
Cantilever dynamics in atomic force microscopy
Arvind Raman, John Melcher, and Ryan Tung
Birck Nanotechnology Center and the School of Mechanical Engineering Purdue University, West Lafayette, IN 47907, USA
nanotoday, Feb-Apr 2008, Vol. 3, No.1-2
Compliant biomechanics of abdominal aortic aneurysms: A fluid–structure interaction study
Christine M. Scotti, Ender A. Finol
Biomedical Engineering Department, Institute for Complex Engineered Systems, Carnegie Mellon University, 5000 Forbes Avenue, Pittsburgh, PA, 15213, USA
Computers and Structures 85 (2007) 1097–1113
Novel model to analyze the effect of a large compressive follower pre-load on range of motions in a lumbar spine
Susan M. Rennera,d, Raghu N. Natarajana,b, Avinash G. Patwardhanc,d, Robert M. Haveyc,d, Leonard I. Voronovd, Bev Y. Guod, Gunnar B.J. Anderssonb, Howard S. Anb
aBioengineering, University of Illinois at Chicago, Chicago, IL, USA
bDepartment of Orthopedic Surgery, Rush University Medical Center, Chicago, IL, USA
cDepartment of Orthopedic Surgery and Rehabilitation, Loyola University Medical Center, Maywood, IL, USA
dMusculoskeletal Biomechanics Laboratory, Department of Veterans Affairs, Edward Hines Jr. VA Hospital, Hines, IL, USA
Journal of Biomechanics 40 (2007) 1326–1332
Control rod drop analysis by finite element method using fluid–structure interaction for a pressurized water reactor power plant
K.H. Yoon., J.Y. Kim, K.H. Lee, Y.H. Lee, H.K. Kim
Korea Atomic Energy Research Institute, Daedukdaero 1045 Dukjin-Dong, Yusong-Ku, Daejeon 305-353, Republic of Korea
Nuclear Engineering and Design 239 (2009) 1857–1861
Assessment of potential-based fluid finite elements for seismic analysis of dam–reservoir systems
Najib Bouaanani , Fei Ying Lu
Department of Civil, Geological and Mining Engineering, École Polytechnique de Montréal, Montréal, QC, Canada H3C 3A7
Computers and Structures 87 (2009) 206–224
Blood flow dynamics and fluid–structure interaction in patient-specific bifurcating cerebral aneurysms
Alvaro Valencia1, Darren Ledermann1, Rodrigo Rivera2, Eduardo Bravo2 and Marcelo Galvez2
1Department of Mechanical Engineering, Universidad de Chile, Casilla 2777, Santiago, Chile
2Neuroradiology Department, Instituto de Neurocirugia Asenjo, Jose Manuel Infante 553, Santiago, Chile
Int. J. Numer. Meth. Fluids 2008; 58:1081–1100
An impedance sensor to monitor and control cerebral ventricular volume
Andreas Linningera, Sukhraaj Basatia, Robert Dawea, Richard Pennb
aLaboratory for Product and Process Design (LPPD), Department of Bioengineering, University of Illinois at Chicago, Chicago, IL 60607, United States
bDepartment of Neurosurgery, University of Chicago, Chicago, IL 60637, United States
Medical Engineering & Physics 31 (2009) 838–845
In situ thermal imaging and three-dimensional finite element modeling of tungsten carbide–cobalt during laser deposition
Yuhong Xionga, William H. Hofmeisterb, Zhao Chengc, John E. Smugereskyd, Enrique J. Laverniaa, Julie M. Schoenunga
aDepartment of Chemical Engineering and Materials Science, University of California, Davis, CA 95616, USA
bCenter for Laser Applications, University of Tennessee Space Institute, Tullahoma, TN 37388, USA
cEarth Mechanics Inc., Oakland, CA 94621, USA
dSandia National Laboratories, Livermore, CA 94551, USA
Acta Materialia 57 (2009) 5419–5429
For references on the theoretical background of ADINA, see our Theory page.
ADINA in Exciting Areas of Research
ADINA is very widely used in diverse areas of exciting research. To highlight these areas and provide our users with easy access to related publications, we listed many papers on studies in which ADINA was used on the ADINA Publications page. Recently, we have updated this page and added more than 100 new papers on the usage of ADINA in many exciting studies:
- Alternative Energy, Nanotechnology and MEMS: Fuel cell, wind turbine, space solar cell, atomic force microscopy, nano-indentation, micro roughness for drag reduction, micropumps, etc.
- Biomechanics, Biomedical and Biotechnology: Cell and tissue mechanics, cardiovascular, orthopedic, eye disease, contact lens, drug delivery, ventricular assist devices, spine, carpal tunnel, implant/prosthetic design, meniscus replacement, lung, vessel remodeling, vocal fold, bioreactor, mitral valve leaflet, etc.
- Civil (Structural/Geotechnical): Borehole stability, dam-reservoir interaction, slope stability, composite concrete-steel frames, historic masonry structures, tunnels, buried pipeline subject to earthquake, interfacial debonding in reinforced concrete, pile-soil interaction, reservoir landslide, hydrofracture, modeling tsunami, etc.
- Mechanics and Materials: Laser deposition, microstructure modification, passive vibration control, fiber-reinforced composites, delamination, fracture mechanics, friction welding, journal bearing, metal forming, thermomechanics of rocket nozzles, piping systems, stiffened plates, dynamics of liquid storage tanks, nuclear power plants, cohesive zone, etc.
The comprehensive capabilities offered in ADINA for simulating Structures, Fluids, Fluid-structure Interactions and Multiphysics, are instrumental in the success of these researches.
Here we highlight some of these papers. For the complete list, see ADINA Publications.
Multi-scale design simulation of a novel intermediate-temperature micro solid oxide fuel cell stack system
S.F. Lee, C.W. Hong
Department of Power Mechanical Engineering, National Tsing Hua University, Hsinchu 30013, Taiwan
Int. J. of Hydrogen Energy (In press, 2010)
Direct methanol fuel cell bubble transport simulations via thermal lattice Boltzmann and volume of fluid methods
K. Fei, T.S. Chen, C.W. Hong
Department of Power Mechanical Engineering, National Tsing Hua University, 101, Sec. 2, Kwang Fu Road, Hsinchu 30013, Taiwan
Journal of Power Sources 195 (2010) 1940–1945
Fluid-Structure Coupled Analyses of Composite Wind Turbine Blades
Tai-Hong Cheng1, Il-Kwon Oh2
1School of Mechanical Engineering, Chonnam National University, 300 Yongbong-dong, Buk-gu, Gwang-Ju, 500-757, Republic of Korea
2School of Mechanical Systems Engineering, Chonnam National University, 300 Yongbong-dong, Buk-gu, Gwang-Ju, 500-757, Republic of Korea
Advanced Materials Research Vols. 26-28 (2007) pp 41-44
Crack growth resistance of shape memory alloys by means of a cohesive zone model
Yuval Freed, Leslie Banks-Sills
The Dreszer Fracture Mechanics Laboratory, Department of Solid Mechanics, Materials and Systems, The Fleischman Faculty of Engineering, Tel Aviv University, 69978 Ramat Aviv, Israel
Journal of the Mechanics and Physics of Solids 55 (2007) 2157–2180
Delamination behaviour of very high modulus carbon/epoxy marine composites
N. Barala, P. Daviesb, C. Baleyc, B. Bigourdanb
aTrimaran Groupama, 56100 Lorient, France
bMaterials and Structures Group, IFREMER Brest Centre, 29280 Plouzane, France
cUniversite de Bretagne Sud, L2PIC, BP 92116, 56321 Lorient Cedex, France
Composites Science and Technology 68 (2008) 995–1007
MRI-based biomechanical imaging: initial study on early plaque progression and vessel remodeling
Jie Zhenga, Dana R. Abendscheina, Ruth J. Okamotoa, Deshan Yanga, Kyle S. McCommisa, Bernd Misselwitzb, Robert J. Groplera, Dalin Tangc
aMallinckrodt Institute of Radiology, Washington University, St. Louis, MO 63131, USA
bBayer Schering Pharma AG, 13353 Berlin, Germany
cWorcester Polytechnic Institute, MA 01609, USA
Magnetic Resonance Imaging (2009, in press)
A numerical study of the flow-induced vibration characteristics of a voice-producing element for laryngectomized patients
S.L. Thomsona, J.W. Tackb, G.J. Verkerkeb,c
aDepartment of Mechanical Engineering, Brigham Young University, 435 CTB, Provo, UT, USA
bDepartment of BioMedical Engineering, University Medical Center Groningen, University of Groningen, The Netherlands
cDepartment of Biomechanical Engineering, University of Twente, The Netherlands
Journal of Biomechanics 40 (2007) 3598–3606
Finite element analysis of blood flow characteristics in a Ventricular Assist Device (VAD)
Mir-Hossein Moosavi, Nasser Fatouraee, Hamid Katoozian
Biological Fluid Mechanics Research Laboratory, Biomedical Engineering Faculty, Amirkabir University of Technology (Tehran Polytechnic), Tehran 15914, Iran
Simulation Modelling Practice and Theory 17 (2009) 654–663
Influence of microcalcifications on vulnerable plaque mechanics using FSI modeling
Danny Bluesteina, Yared Alemua, Idit Avrahamib,e, Morteza Gharibb, Kris Dumonta, John J. Ricottac, Shmuel Einava,d
aDepartment of Biomedical Engineering, Stony Brook University, Stony Brook, NY 11794-8181, USA
bAeronautics and Bioengineering, California Institute of Technology, Pasadena, CA, USA
cDepartment of Surgery, Stony Brook University Hospital, Stony Brook University, Stony Brook, NY 11794-8181, USA
dDepartment of Bioengineering, Tel Aviv University, Tel Aviv, Israel
eAfeka College of Engineering, Tel Aviv, Israel
Journal of Biomechanics 41 (2008) 1111–1118
Numerical Simulations of Blood Flow in Artificial and Natural Hearts With Fluid–Structure Interaction
*Matthew G. Doyle, *Jean-Baptiste Vergniaud, *Stavros Tavoularis, and *,†Yves Bourgault
*Department of Mechanical Engineering, University of Ottawa
†Department of Mathematics and Statistics, University of Ottawa, Ottawa, Canada
Artificial Organs 32(11):870–879, 2008
Contact interface in seismic analysis of circular tunnels
Hassan Sedarata, Alexander Kozaka, Youssef M.A. Hashashb, Anoosh Shamsabadic, Alex Krimotata
aSC Solutions, 1261 Oakmead Parkway, Sunnyvale, CA 94085, USA
bUniversity of Illinois at Urbana-Champaign, 205 N. Mathews Ave., Urbana, IL 61801, USA
cCaltrans, Department of Transportation, State of California, 3 Mayapple Way, Irvine, CA 92612, USA
Tunnelling and Underground Space Technology 24 (2009) 482–490
Modeling the dynamic process of tsunami earthquake by liquid-solid coupling model
CAI Yong-en and ZHAO Zhi-dong
Department of Geophysics, Peking University, Beijing 100871, China
Acta Seismologica Sinica Vol.21 No.6 (598-607) 2008
Numerical simulation of fluid–structure interaction in stenotic arteries considering two layer nonlinear anisotropic structural model
Alvaro Valencia, Fernando Baeza
Department of Mechanical Engineering, Universidad de Chile, Casilla 2777, Santiago, Chile
International Communications in Heat and Mass Transfer 36 (2009) 137–142
A numerical investigation of waves propagating in the spinal cord and subarachnoid space in the presence of a syrinx
C.D. Bertram
Biofluid Mechanics Laboratory, Faculty of Engineering, University of New South Wales, Sydney 2052, Australia
Journal of Fluids and Structures 25 (2009) 1189–1205
Characterization of the highly nonlinear and anisotropic vascular tissues from experimental inflation data: a validation study towards the use of clinical data for in-vivo modeling and analysis
Kinon Chen1, Bahar Fata2, and Daniel R. Einstein3
1Department of Biomedical Engineering, University of Southern California, Los Angeles, CA
2Department of Bioengineering, University of Pittsburgh, Pittsburgh, PA
3Biological Monitoring & Modeling, MS P7-56, Pacific Northwest National Laboratory, Richland, WA
Ann Biomed Eng. 2008 October ; 36(10): 1668–1680.
Fluid-structure analysis of microparticle transport in deformable pulmonary alveoli
H.L. Daileya, S.N. Ghadialia,b
aMechanical Engineering and Mechanics, Lehigh University, Bethlehem, PA 18015, USA
bBioEngineering Program, Lehigh University, Bethlehem, PA 18015, USA
Aerosol Science 38 (2007) 269 – 288
Drag Reduction on Micro-Structured Super-hydrophobic Surface
Doyoung Byun1, Saputra2 and Hoon Cheol Park2
1Artificial Muscle Research Center, Department of Aerospace Engineering, Konkuk University, 1 Hwayang-dong, Gwangjin-gu, 143-701 Seoul, Korea
2Artificial Muscle Research Center, Department of Advanced Technology Fusion, Konkuk University,1 Hwayang-dong, Gwangjin-gu, 143-701 Seoul, Korea
Proceedings of the 2006 IEEE International Conference on Robotics and Biomimetics
Modeling and optimizing passive valve designs for the implantable Gold Micro-Shunt used in glaucoma treatment
Judy L. Lin, Jason M. Clevenger
SOLX, Inc., 890 Winter Street, Suite 115, Waltham, MA 02451, USA
Computers and Structures 87 (2009) 664–669
Biphasic Finite Element Model of Solute Transport for Direct Infusion into Nervous Tissue
Xiaoming Chen and Malisa Sarntinoranont
Department of Mechanical and Aerospace Engineering, 212 MAE-A, University of Florida, Gainesville, FL 32611, USA
Annals of Biomedical Engineering, Vol. 35, No. 12, December 2007, pp. 2145–2158
Mechanical characterization of contact lenses by microindentation: Constant velocity and relaxation testing
Sung Jin Leea, Gerald R. Bourneb, Xiaoming Chena, W. Gregory Sawyera, Malisa Sarntinoranonta
aDepartment of Mechanical and Aerospace Engineering, University of Florida, Gainesville, FL 32611, USA
bDepartment of Material Science and Engineering, University of Florida, Gainesville, FL 32611, USA
Acta Biomaterialia 4 (2008) 1560–1568
Nonlinear fluid–structure interaction calculation of the leakage behaviour of cracked concrete walls
Christoph Niklascha, Nico Herrmannb
aEd. Züblin AG, Technical Head Office, Tunnel Engineering Department, Albstadtweg 3, 70567 Stuttgart, Germany
bMaterials Testing and Research Institute (MPA Karlsruhe), Universität Karlsruhe (TH), 76128 Karlsruhe, Germany
Nuclear Engineering and Design 239 (2009) 1628–1640
A fluid-immersed multi-body contact finite element formulation for median nerve stress in the carpal tunnel
Cheolwoong Ko and Thomas D. Brown
Department of Orthopaedics and Rehabilitation University of Iowa, Iowa City, IA 52242-1100, USA
Comput Methods Biomech Biomed Engin. 2007 October ; 10(5): 343–349.
Cantilever dynamics in atomic force microscopy
Arvind Raman, John Melcher, and Ryan Tung
Birck Nanotechnology Center and the School of Mechanical Engineering Purdue University, West Lafayette, IN 47907, USA
nanotoday, Feb-Apr 2008, Vol. 3, No.1-2
Compliant biomechanics of abdominal aortic aneurysms: A fluid–structure interaction study
Christine M. Scotti, Ender A. Finol
Biomedical Engineering Department, Institute for Complex Engineered Systems, Carnegie Mellon University, 5000 Forbes Avenue, Pittsburgh, PA, 15213, USA
Computers and Structures 85 (2007) 1097–1113
Novel model to analyze the effect of a large compressive follower pre-load on range of motions in a lumbar spine
Susan M. Rennera,d, Raghu N. Natarajana,b, Avinash G. Patwardhanc,d, Robert M. Haveyc,d, Leonard I. Voronovd, Bev Y. Guod, Gunnar B.J. Anderssonb, Howard S. Anb
aBioengineering, University of Illinois at Chicago, Chicago, IL, USA
bDepartment of Orthopedic Surgery, Rush University Medical Center, Chicago, IL, USA
cDepartment of Orthopedic Surgery and Rehabilitation, Loyola University Medical Center, Maywood, IL, USA
dMusculoskeletal Biomechanics Laboratory, Department of Veterans Affairs, Edward Hines Jr. VA Hospital, Hines, IL, USA
Journal of Biomechanics 40 (2007) 1326–1332
Control rod drop analysis by finite element method using fluid–structure interaction for a pressurized water reactor power plant
K.H. Yoon., J.Y. Kim, K.H. Lee, Y.H. Lee, H.K. Kim
Korea Atomic Energy Research Institute, Daedukdaero 1045 Dukjin-Dong, Yusong-Ku, Daejeon 305-353, Republic of Korea
Nuclear Engineering and Design 239 (2009) 1857–1861
Assessment of potential-based fluid finite elements for seismic analysis of dam–reservoir systems
Najib Bouaanani , Fei Ying Lu
Department of Civil, Geological and Mining Engineering, École Polytechnique de Montréal, Montréal, QC, Canada H3C 3A7
Computers and Structures 87 (2009) 206–224
Blood flow dynamics and fluid–structure interaction in patient-specific bifurcating cerebral aneurysms
Alvaro Valencia1, Darren Ledermann1, Rodrigo Rivera2, Eduardo Bravo2 and Marcelo Galvez2
1Department of Mechanical Engineering, Universidad de Chile, Casilla 2777, Santiago, Chile
2Neuroradiology Department, Instituto de Neurocirugia Asenjo, Jose Manuel Infante 553, Santiago, Chile
Int. J. Numer. Meth. Fluids 2008; 58:1081–1100
An impedance sensor to monitor and control cerebral ventricular volume
Andreas Linningera, Sukhraaj Basatia, Robert Dawea, Richard Pennb
aLaboratory for Product and Process Design (LPPD), Department of Bioengineering, University of Illinois at Chicago, Chicago, IL 60607, United States
bDepartment of Neurosurgery, University of Chicago, Chicago, IL 60637, United States
Medical Engineering & Physics 31 (2009) 838–845
In situ thermal imaging and three-dimensional finite element modeling of tungsten carbide–cobalt during laser deposition
Yuhong Xionga, William H. Hofmeisterb, Zhao Chengc, John E. Smugereskyd, Enrique J. Laverniaa, Julie M. Schoenunga
aDepartment of Chemical Engineering and Materials Science, University of California, Davis, CA 95616, USA
bCenter for Laser Applications, University of Tennessee Space Institute, Tullahoma, TN 37388, USA
cEarth Mechanics Inc., Oakland, CA 94621, USA
dSandia National Laboratories, Livermore, CA 94551, USA
Acta Materialia 57 (2009) 5419–5429
For references on the theoretical background of ADINA, see our Theory page.