[pSeven] 미쯔비시모터스의 Internal Combustion 근사모델 생성 예시

pSeven예제
작성자
ablemax
작성일
2018-07-27 11:21
조회
630

Creating Internal Combustion Approximation Model for Mitsubishi Motors


Industry: Automotive | Product: pSeven | Company: Mitsubishi Motors Corporation


DATADVANCE constructed an approximation model for Mitsubishi Motors to predict internal combustion pressure model parameters.


The modern automotive market requires manufacturers to balance between increasing customer demands, strict environmental regulations. To meets the regulations, lightweight and good efficiency vehicle are required. But sometimes these negatively affect NVH comfortability. For these interwoven attributes, using the numerical simulation, system modeling, and design space exploration become the best option automotive companies can find an optimal solution to meet all these requirements.


Calculating engine exciting force requires knowing internal combustion pressure at arbitrary operation regimes. And combustion pressure is changed repeatedly every development phase with calibration of control design value. But it needs to build a complex and large-scale engine model. To describe the combustion process, in this case, Mitsubishi Motors used very simple physical model and approximation model with well-known Wiebe function that depends on five internal parameters and polytropic index. The simple engine model is also affected by several operational parameters, so parameters of Wiebe function model are required to adopt such variations. Approximation model can find out Wiebe function parameters at the arbitrary condition and consequently, it gives an accurate combustion pressure calculation in the simple model.



Experimental engine in-cylinder pressure vs. crank angle curves for different RPM


pSeven was used as a powerful and helpful tool to predict combustion model parameters. It allowed creating a single workflow that uses an available small number of experimental data as input, run combustion simulation in Simulink and implement approximation techniques to results. As a first step, optimization of residuals was used to fit the parameters of a combustion model to existing experimental combustion pressure vs. crank angle curves. As the next step, an approximation model was created to predict these parameters at arbitrary regimes using known values, like intake and exhaust manifold pressure, fuel consumption, injection timing, O2 concentration, brake mean effective pressure and RPM.



Multidimensional approximation model of combustion created in pSeven


The created approximation model will be further used in 1D engine simulations via export through m-file or FMI (Functional Mock-up Interface), a tool-independent standard to support both model exchange and co-simulation of dynamic models, in almost any system modeling software. Such approximation models are also very fast in terms of computation, so implementing them in the product development process leads to significant time savings.



Case study of combustion pressure estimation model and NVH combination


About Mitsubishi Motors Corporation


Mitsubishi Motors Corporation is a global automobile company based in Tokyo, Japan, which has a competitive edge in SUVs and pickup trucks, electric and plug-in hybrid vehicles. The company launched the i-MiEV – the first mass-produced electric vehicle in 2009, which was followed by the OUTLANDER PHEV in 2013 – a plug-in hybrid market leader in Japan and Europe. Mitsubishi Motors has 30,000 employees and a global footprint with production facilities in Japan, Thailand, China, Indonesia, Philippines, and Russia. Models, such as the PAJERO SPORT/MONTERO SPORT, TRITON/L200, and OUTLANDER play a major role in achieving its growth. The global sales volume in the fiscal year 2017 was 1,101,000 units, and the net sales of Mitsubishi Motors for the fiscal year 2017 was 2.19 trillion yen. Mitsubishi Motors is listed on the Tokyo Stock Exchange.

전체 461
번호 제목 작성자 작성일 추천 조회
459
[ADINA] 산업별 적용 사례 모음
ablemax | 2019.09.19 | 추천 0 | 조회 239
ablemax 2019.09.19 0 239
458
[ADINA] Tech Briefs : shell structures
ablemax | 2019.09.19 | 추천 0 | 조회 250
ablemax 2019.09.19 0 250
457
[UM] 모노레일/자기부상열차 시뮬레이션 영상 예시
ablemax | 2019.08.13 | 추천 0 | 조회 359
ablemax 2019.08.13 0 359
456
[SINDA/FLUINT] 6.1 업데이트 버전 (Thermal Desktop 유저인터페이스) 설명 영상 안내
ablemax | 2019.08.06 | 추천 0 | 조회 363
ablemax 2019.08.06 0 363
455
[SINDA/FLUINT] 6.1 업데이트 버전 (Thermal Desktop / RadCAD) 설명 영상 안내
ablemax | 2019.08.06 | 추천 0 | 조회 399
ablemax 2019.08.06 0 399
454
[SINDA/FLUINT] 6.1 업데이트 버전 (FloCAD) 설명 영상 안내
ablemax | 2019.08.06 | 추천 0 | 조회 305
ablemax 2019.08.06 0 305
453
[BruceEYE] 인공지능 기반 영상분석 플랫폼 BruceEYE 적용 예시
ablemax | 2019.04.09 | 추천 0 | 조회 645
ablemax 2019.04.09 0 645
452
프로모션사례2 : 피닉스 큐브셋 Thermal Modeling (아리조나 주립대)
ablemax | 2019.03.27 | 추천 0 | 조회 495
ablemax 2019.03.27 0 495
451
프로모션사례1 : 대학 설계 경진대회 포뮬라1 스타일 경주자동차 파워저장장치 해석 (위스콘신대)
ablemax | 2019.03.27 | 추천 0 | 조회 497
ablemax 2019.03.27 0 497
450
[SINDA./FLUINT] Thermal Desktop 튜토리얼 영상 모음 2
ablemax | 2019.02.14 | 추천 0 | 조회 687
ablemax 2019.02.14 0 687